Common Questions

Epoxy Flooring Questions and Straight Answers

Most epoxy flooring questions come down to lifespan, cure time and upkeep. Concrete polishing, repairs, screen rooms and scheduling with Stewart Services matter too.

Coatings

Epoxy Flooring Questions on Lifespan and Epoxy Floor Maintenance

How long does epoxy flooring last?

How long epoxy flooring lasts depends mostly on preparation, the coating system and how hard the floor is used. A slab that is properly ground, repaired and coated holds up far better than paint rolled over dirty concrete. Stewart Services explains how each epoxy floor coating option handles car traffic, tools and moisture before you decide.

What is the usual epoxy floor cure time?

Epoxy floor cure time varies with the product, the number of coats, the temperature and the humidity, which runs high near the coast. A floor is usually ready for foot traffic well before it can take the weight of a vehicle. You get clear timing for walking, moving items back and parking on your garage floor coating before work starts.

What does epoxy floor maintenance involve?

Epoxy floor maintenance is simple. Sweep or dust mop regularly so grit does not scratch the finish, and wash with a mild cleaner and water when needed. Wipe up oil, chemicals and standing water promptly, and avoid harsh acids or abrasive pads. More on keeping a coated floor looking new is on the epoxy flooring service page.

Can epoxy go over a cracked or stained garage floor?

Usually, yes, as long as the damage is repaired first. Cracks, chips and pits are filled, and stains and old residue are ground away so the coating bonds to clean concrete. Serious structural problems need a different fix. The slab is checked in person before any epoxy floor coating is recommended, so you know what to expect.

Polishing, Sealing and Decorative Concrete

Is grind and seal worth it compared with a full coating?

Grind and seal is worth it when you want clean, protected concrete without the cost or look of a thick coating. The surface is ground to remove residue and open the pores, then sealed to resist stains and dusting. It suits garages, patios and utility spaces well. Read how concrete grind and seal compares with coatings before choosing.

What is the difference between polished concrete and epoxy?

Polished concrete is the slab itself, ground in stages until it is smooth and reflective, with no coating on top. Epoxy is a coating applied over the concrete in a chosen color or pattern. Polishing keeps a natural stone look, while epoxy covers flaws and adds color. The concrete polishing page explains which floors suit each approach.

Can an old patio be updated without pouring new concrete?

Often it can. Decorative options such as staining, resurfacing and stamped overlays can give an existing patio, walkway or pool deck new color and texture while keeping the slab underneath. The concrete needs to be sound for any of these to last. See the decorative concrete options to learn what can be done with a tired outdoor slab.

Handyman Repairs and Screen Rooms

What kinds of handyman repairs does Stewart Services handle?

Stewart Services takes on roof repairs, siding repairs and gutter work, along with the everyday fixes that build up around a home. It makes sense to bundle smaller jobs into one visit when possible. Describe your list when you call, and see the handyman repairs page for the kinds of projects the business covers around the area.

Can you build a screen room over my existing patio?

In many cases, an aluminum screen room can be built over an existing concrete patio or slab, which turns open space into a shaded, bug-free room. The slab's size and condition matter, and a refreshed concrete surface can be planned at the same time. Learn more about aluminum screen rooms and what goes into planning one.

Why choose aluminum for a screen enclosure?

Aluminum does not rot, and it holds up well in the heat, rain and humidity of the Georgia and South Carolina coast. It is lightweight, which makes it practical over an existing slab, and it needs little upkeep beyond occasional cleaning. Screens can be replaced if they are damaged. Read more on the screen room service page.

Planning Ahead

Scheduling and Service Area

What areas does Stewart Services serve?

Stewart Services is based in Rincon, Georgia, and works in Savannah, Rincon and Pooler, plus Hilton Head Island and Bluffton in South Carolina. Savannah is the main market. All work happens at your home or property. Check the service areas page, or call (912) 507-0150 to confirm that your address is covered before you book.

What are your business hours?

Stewart Services is open Monday to Friday, 8:00 AM to 5:00 PM. Calling (912) 507-0150 during those hours is the quickest way to talk through a project and set up a visit. You can also send a request through the contact page at any time, and the business follows up during working hours.

How do I get an estimate for my project?

Call (912) 507-0150 or send a short description of your project through the contact Stewart Services page. A time is then set to look at the space in person, because concrete and repairs are hard to judge from a photo. You hear the options that fit your floor or home, along with what each one involves.

Still Wondering?

Ask Your Own Question

Every slab and every home is a little different, and some answers depend on seeing the space. Call Stewart Services during business hours with whatever question you have about floors, concrete or repairs.